Welcome to your guide on the Walmart Maintenance Technician Test.
If you’re considering a role on Walmart’s maintenance team, this article is here to provide you with the essential information you need.
We’ll delve into the details of the Walmart Maintenance Test, covering its format, scoring, valuable tips, and practice resources.
Whether you’re an experienced professional or new to the field, our insights aim to help you prepare effectively for this crucial step in your Walmart career journey.
Let’s get started on your path to becoming a Walmart maintenance technician.
The Walmart Maintenance Test is a pivotal evaluation in Walmart’s hiring process. Administered by Ramsay Corp., this 60-question test takes about an hour and assesses candidates’ proficiency in mechanical and electrical subjects, determining their suitability for maintenance roles.
On the Walmart MAT (Maintenance Assessment Test), you can anticipate questions from seven distinct test sections, each examining specific areas:
These comprehensive sections collectively gauge your readiness and competence in various aspects of maintenance, ensuring you meet Walmart’s standards for their maintenance roles.
Sample Question #1
A piston-cylinder system is shown above.
The force that is exerted on the piston by the pressure that is inside the cylinder is NOT dependent on ____________.
The correct answer is (2) – d.
The side view of the piston and cylinder system is shown in the figure. However, in a three-dimensional view, all parts are cylindrical.
The force acting on the piston, the pressure inside the cylinder chamber, and the cross-sectional area are also represented in the figure. The pressure inside the cylinder chamber is a force acting per unit area:
The above equation shows that pressure is directly proportional to the force in the piston-cylinder system. Thus, A cannot be the correct choice. Additionally, the force is directly proportional to the area of the cross-section.
This implies that option (3) cannot be correct. However, the force is not dependent on the thickness of the piston. Therefore, (2) is the correct choice.
Sample Question #2
For a crane with a capacity of 25.6 tons, a self-weight of 2.4 tons, and a load of 3.75 tons, the safety factor is:
Correct Answer & Explanation:The correct answer is D.
The safety factor is defined as the ratio between the allowed load (capacity) and the actual load.
The self-weight given is merely a distractor.
Sample Question #3
What load, as shown in the figure below, is lifted by a force of 500 lb.?
A. 1000 lb.
B. 250 lb.
C. 500 lb.
D. None of the above
The correct answer is D.
The relationship between the load (L), the pulling force (F), and the number of pulleys (N) is given by:
Therefore, D is the correct choice.
Sample Question #4
You were required to lubricate a journal bearing with an EP grease. It is likely that the bearing is subjected to:
A. High temperature
B. Low speed
C. High speed
D. Either A or B
The correct answer is D.
The lubrication of a journal bearing is crucial to create an oil film and to prevent metal-to-metal contact. The oil film is weaker in high temperature and low-speed conditions; therefore, a more high-quality lubricant is required.
EP (Extreme Pressure) grease contains solid lubricants that bond to the surface of the metal and help ensure minimal contact between metal parts, even in high temperatures and at low speeds.
Sample Question #5
The main problem with using galvanized pipes for hydraulic equipment is:
A. Lesser head loss due to lesser friction
B. Slower flow rate
C. Contaminations and impurities
D. High cost
The correct answer is C.
Galvanization is a process in which a protective coating (typically made of zinc) is applied to the pipe in order to prevent rust. The zinc layer wears off gradually, which causes impurities and contaminations that may lead to defects in the equipment.
This is especially true regarding hydraulic lines where pressures are high and wear-off rate is fast.
Sample Question #6
Which type of pipe would be most recommended to install deep beneath the ground?
A. Schedule 20
B. Schedule 40
C. Schedule 80
D. Schedule 120
The correct answer is D.
The pipe schedule is a dimensionless number, which refers to the wall thickness of a pipe. The higher the schedule, the thicker the wall.
When installing a pipe underground, it is important for it to have a thick wall due to the pressure of the soil and other structural elements that may lie on top of it.
Therefore, a schedule 120-type pipe will best suit such an application.
Sample Question #7
Print Reading Sample Question" width="363" height="191" />
The purpose of the capacitor in the schematic shown is to:
A. Filter output voltage
B. Prevent instantaneous change in current
C. Rectify the AC input
D. Discharge the stored charge
The correct answer is A.
The schematic shown is a circuit of an AC to DC-conversion power supply. The diodes rectify the AC power, the capacitor filters the rectified output, and the resistor discharges the stored charge when there is no power supply.
Therefore, A is the correct choice. B, C, and D cannot be correct.
Sample Question #8
Print Reading Sample Question" width="841" height="561" />
In the circuit shown above, the forward button is pressed, and the motor has started running. However, it stopped immediately after it started running. The problem is most likely to be in:
A. The motor
B. The forward button
C. The reverse button
D. The load
The correct answer is D.
If the motor starts running, there is no problem with the motor or the forward button. Thus, A and B cannot be correct. It is hard to comment on the reverse button because no information is given about it.
Hence, C should be discarded. The only problem is the load, and most probably, the overloading condition is reached, which turns off the motor.
Therefore, D is the correct choice.
Sample Question #9
The input module of a PLC is not working. What should be the first step for troubleshooting?
A. Check the power source of the input module with a multimeter
B. Set the PLC to standby mode
C. Measure the input voltage
D. None of the above
The correct answer is B.
To troubleshoot the input module, the first thing to do is to put the PLC in standby mode. The PLC executes the code since the input module is connected with sensors.
This can activate the output. Thus, the PLC should be placed in standby mode first before any other diagnostic step. Therefore, B is the correct choice.
Sample Question #10
In the case of a short circuit:
A. Voltage is high, resistance is low
B. Voltage is low, resistance is low
C. Voltage is high, resistance is high
D. Voltage is low, resistance is high
The correct answer is B.
A short circuit occurs when current flows along a path with very low (ideally zero) electrical resistance. In such a case, we can deduce that the voltage will also be low (or zero). Looking at Ohm’s law:
If R=0, it necessarily means that the voltage is also 0, regardless of the amperage of the current flowing through the short circuit.
Note : in reality, resistance is never zero; it is just very low relative to the circuit components.
Preparing for the Walmart DC Maintenance Test with accurate practice tests is paramount for several reasons:
For the most accurate and reliable preparation, consider using JobTestPrep’s practice tests tailored specifically for the Walmart Maintenance Test.
These practice materials are designed to mirror the actual test’s content and difficulty level, ensuring you’re well-prepared to achieve a high score.
The scoring method for the Walmart Ramsay Test is akin to other Ramsay assessments, such as the Ramsay Maintenance Test and the Ramsay Electrical Test.
Here’s the deal: You’ll receive a score for each category, which will be compared against the qualification standard set by Ramsay Corporation. Based on these individual category scores, your overall score is calculated.
There are two possible outcomes:
But here’s the twist: even if you score “Competitive,” it doesn’t guarantee you a free pass to the next hiring stage. Walmart often selects only the cream of the crop due to high demand.
That’s why it’s important to do your best and strive to score as high as possible.
Preparing for the Walmart Maintenance Test requires a strategic approach. Here are five unique and tailored tips to help you excel in this assessment:
After passing the Walmart Maintenance Assessment Test, you’ll progress through the hiring process, which typically includes:
No, you cannot bring reference materials or calculators. The test is designed to assess your knowledge and skills without external aids.
Each section has a different number of questions, ranging from 7 to 12. In total, there are 60 questions across all sections.
Typically, you cannot skip sections and return to them later. It’s advisable to manage your time efficiently within each section.
The timeline for receiving results may vary. Walmart’s HR department will usually communicate the results and further steps in the hiring process once they are available.
Yes, many positions at Walmart, including maintenance technicians, may require candidates to undergo drug testing to ensure a safe work environment.
Conclusion
The Walmart Maintenance Tech Test is a significant hurdle in securing a role as a maintenance technician at Walmart. Understanding the test format, focusing on key topics, and utilizing accurate practice tests can boost your chances of success.
Remember that passing the test is just the first step, as the challenging hiring process at Walmart includes interviews, background checks, and more. With dedicated preparation and a commitment to mastering the essential skills, you can pave the way to a rewarding career in maintenance at Walmart.
Preparing for a different Ramsay test? Check our Free Ramsay practice test to try sample questions for all Ramsay tests.
